Australia
UPDATE_BWT955_750GL_PWT550GLGZ_HWT250GL_V114.exe / 129,930,360 bytes
Update Date
13/Apr/2015
Network Download
From 13/Apr/2015
Improvement
Date/Version
Description
13/Apr/2015
Ver 1.14
Activate Remote Viewing and Recording function
Update VIErA Connect function
Update Procedures (Overview)
Perform steps 1 through 6 listed below.
Step 1 Check the firmware version currently installed in your Panasonic Recorder.
Step 2 Check the latest firmware version available for your Panasonic Recorder.
Step 3 Download the latest firmware.
Step 4 Decompress the downloaded file.
Step 5 Create a firmware update USB memory.
Step 6 Install the firmware.
Step 1. Check the firmware version currently installed in your Panasonic Recorder
Follow the steps below to check the firmware version currently installed in your Panasonic Recorder.
Steps
Turn on the main unit.
Press the [FUNCTION MENU] button on the remote control to open the display menu screen.
Using the Up and Down cursor buttons on the remote control, select the "Setup" tab.
Using the Up and Down cursor buttons, select the "Basic Settings" tab.
Using the Up and Down cursor buttons, select the "Others" tab.
Select the "System Information" tab. The current firmware version for your recorder will be displayed at the top of the screen (e.g. "1.00").
Please make note of this version number.
Step 2. Checking the latest firmware version available for your Panasonic Recorder
Confirm the latest firmware version that is available for "the Model Number of your Panasonic Recorder" by referencing the "Update Information" section provided above (near the top of this page).
Please compare this firmware version number to the version number of the firmware currently installed in your Panasonic Recorder (the firmware currently installed in your Panasonic Recorder was checked in "Step 1").
If the version of the firmware installed on your Panasonic Recorder and the latest firmware version available are the same
>> No update is necessary
If the version of the firmware installed on your Panasonic Recorder is lower than the latest version available
>> Update is recommended - Please continue to step 3
NOTE:
The firmware for your Panasonic Recorder may not need to be updated even though a firmware update has been released - for example.
If your Panasonic Recorder was manufactured after the firmware was released and the firmware update has already been installed.
If your Panasonic Recorder was serviced by an authorized Panasonic service technician the recorder was updated with the latest firmware.
Step 3. Download the latest Firmware
If the version of the firmware installed in your recorder is lower than the latest version of the firmware available , please download the latest version of the firmware.
Use of software downloaded from this site requires following License Agreement. Please review the contents of the License Agreement beforehand.
Please click the button when agreeing to the agreement.