Head on this page.
Check the file size of the downloaded file and decompress it. (Supported for Windows only.)
File size is 90,252,704 bytes.
You will not be able to install firmware designated for a region that is different to the region in which you purchased your Panasonic Blu-ray Disc™ Player Theater.
To create a firmware update disc, write the decompressed file to a CD-R disc using CD-R writing software. Follow the operating instructions for the writing software to create the disc. Once the firmware update disc is created, continue to the next step.
1. About the CD-R disc:
If the firmware update disc has writting errors, it will not be readable by the Panasonic Blu-ray Disc™ Player Theater and you will not be able to update the firmware.
Always use a blank CD-R disc. Do not use a CD-RW disc.
2. About the CD-R writing software:
If you are creating the firmware update disc on a Microsoft Windows PC, we recommend using the standard Windows XP writing application.
The firmware update disc requires to be created with ISO9660 format. In case you are creating the disc on a Windows Vista PC, Windows Vista standard writing application does NOT support ISO9660 format. Please create with a supporting writing software.
When using writing software, please follow the operating instructions provided for the writing software. Please be aware that "packet-writing" is not supported.
It will take about 8 minutes to update the firmware. During the firmware update procedure, do not turn the Panasonic Blu-ray Disc™ Player Theater off or disconnect AC power. Do not press any buttons, except as instructed.
Failing to do so may cause the Panasonic Blu-ray Disc™ Player Theater becoming unresponsive which will require repair.
Turn your Panasonic Blu-ray Disc™ Player Theater on.
Insert the firmware update disc into your Panasonic Blu-ray Disc™ Player Theater.
DO NOT press any other buttons during the firmware update.
The Panasonic Blu-ray Disc™ Player Theater will first display "Bye" on the front panel display, automatically turn itself off and then, within a few seconds, restart again and automatically start installing the firmware from the firmware update disc.
If the Panasonic Blu-ray Disc™ Player Theater does not restart automatically after it has turned off, please press [POWER] on the Panasonic Blu-ray Disc™ Player Theater - the Panasonic Blu-ray Disc™ Player Theater will then restart and install the firmware update as normal.
The time to complete the firmware update will vary, however the time should not exceed 15 minutes. Please be patient during the firmware upgrade!
During the update process, various messages will show on the front panel display of the Panasonic Blu-ray Disc™ Player Theater.
When the firmware update is completed, "FINISH" is displayed on the front panel display of the Panasonic Blu-ray Disc™ Player Theater and the disc tray opens automatically.
Please take out the firmware update disc and turn off power with the power button on the main unit. The firmware update installation procedure is now completed.
During the firmware update procedure, do not turn the unit off, disconnect it from AC power (outlet) and press any buttons except as instructed.
Failing to do so may result in an unresponsive unit that will require repair.
If the firmware version currently installed on the Panasonic Blu-ray Disc™ Player Theater is the same or more recent than the firmware version on the update disc, "UNSUP/PORT" will be displayed for approximately 5 seconds on the front display of the Panasonic Blu-ray Disc™ Player Theater. In this case, an update is unnecessary - please remove the disc.
Display on the Panasonic Blu-ray Disc™ Player Theater:
If you have any problems after installing the new firmware, please contact the Global Support.