| How to connect to the network? |
|
| Cannot connect to the network |
- Confirm the network connection and settings.
- If this unit cannot join a wireless network using WPS method (router security using WEP setting, etc.), please refer to "If your wireless network router does not support WPS.". (Method 2)
- Your wireless network might be set to be invisible. In this case select "Manual settings" in another method (Method 2)
|
| Wi-Fi status indicator doesn't blink blue after press [WPS] button at main set (Method 1) |
- Please press and hold the button for more than 2 sec.
|
| Wi-Fi status indicator blinks red after connect using WPS |
- Check the distance between this unit and router. Please locate it closer with each other.
- Check whether router security using WEP setting or not. If yes, please refer to "If your wireless network router does not support WPS." (Method 2)
- Check the setting steps, do the setting again. If still cannot connect, please use the setting method for "If your wireless network router does not support WPS.". (Method 2)
- Please confirm whether no other device connecting to router using WPS method nearby. After confirming that, please try again to connect.
|
| Wi-Fi status indicator blinks red after connect using "If your wireless network router does not support WPS" method (Method 2) |
- Check the distance between this unit and router. Please locate it closer with each other.
- Check the setting steps, do the setting again.
- Confirm that the radio mode setting on the router is 802.11b/g compatible mode.
|
| After press and hold both [VOLUME +] and [WPS] on the unit for more than 2 seconds, Wi-Fi status indicator blinks purple, but iPhone not showing "Setup ______" at Wi-Fi network setting (Method 2) |
- Turn off/on network setting at iPhone, confirm again.
- Check the distance between this unit and iPhone. Please locate it closer with each other.
|
| "Not connected" appear at iPhone display after select "Setup ______" (Method 2) |
- Wait for about 30 sec, and try select again "Setup ______".
|
| Web page not showing after input "http://192.168.1.12/" (Method 2) |
- Please confirm whether "Setup ______" is selected or not at iPhone.
- Make sure that DHCP is enabled for the network setting on the iPhone.
- Enable Java and Cookies in your browser settings.
|
| How to check the unit's MAC address? |
- You can check the unit's MAC address with the following steps.
- 1. Turn the unit on.
- 2. Press and hold both [VOLUME +] and [– WPS] on this unit for more than 2 seconds. （Wi-Fi status indicator blinks purple.)
- 3. Check [Settings] -> [Wi-Fi」 on your iPhone/iPod touch.
- 4. "Setup ______" will appear after a while.
->MAC address is combining "cc7ee7" and 6 characters followed by "Setup". For example, if "Setup 2b0313" appears, the unit's MAC address becomes "cc:7e:e7:2b:03:13".
|
| Cannot update firmware |
- "The operation indicator blinks 3 times."
Make sure that the wireless network is connected to the internet.
- "The operation indicator blinks 2 times."
This unit cannot connect to the network. Check the network connection.
- "The operation indicator blinks 1 time."
Turn off/on again this unit, plug out/in the AC mains lead, and try to update again.
|
Digital AV Support > Audio > FAQ > SC-AP01 FAQs about network settings and AirPlay