MW-10 Firmware Update Service for Oceania

Dear Customers,
We would like to thank you for purchasing Panasonic MW-10.
From this site, you'll be able to easily download the latest firmware to enhance the product's performance.

Model Number	MW-10P
Update Version	Ver 1.04
Update File Name / Size	UPDATE_MW10P.EXE / 5,913,622 bytes (After self-extract: MW10P103.FRM / 3,999,304 bytes and AUTOP104.FRM / 4,095,680 bytes)
Update Date	Jan. 12, 2010

Date/Version	Description
Jan. 12, 2010 Ver 1.04	Compatibility update for iPod

• STEP 1. Check the current firmware version of your MW-10.
• STEP 2. Download and self-extract the latest firmware.
• STEP 3. Copy the firmware file onto an SD Memory Card.
• STEP 4. Install the firmware update with the SD Memory Card.

Panasonic recommends that you update the firmware in your MW-10 in case that the firmware version indicated is older than the version being offered, except Version 1.04.
It is not necessary to update to the latest version 1.04 if the current version 1.04 is installed.

1. Turn the MW-10 on.
2. Press the [SETUP] button on the remote controller.
3. Using the Up and Down Cursor buttons on the remote controller, select the "System Software Info" in "Setting Menu", and Press the [OK] button on the remote controller.
   
4. The current firmware version will appear on the display.
   Turn the MW-10 off.
   

Download of any file for Panasonic firmware update requires your agreement with the software agreement. You may proceed to the next step only once you have agreed. Please make sure to confirm all terms and conditions in advance to proceed to download.