Digital AV Support > Audio > Download > SC-HTB600 Firmware Download
SC-HTB600 Firmware Download
Update Information
| Model Number | SC-HTB600 |
|---|---|
| Update Version | MCU V1.49, DSP V2.34, EP V2.2, BT V2.96, TX 0.19, RX 0.20 |
| Update Date | Sep. 7, 2020 |
Improvement
| Date/Version | Description |
|---|---|
| Sep. 7, 2020 MCU V1.49, DSP V2.34, EP V2.2, BT V2.96, TX 0.19, RX 0.20 |
|
Update Procedures (Overview)
- Step 1 Check the current firmware version of your SC-HTB600.
- Step 2 Download the latest firmware on USB device.
- Step 3 Perform the firmware update.
Perform the following steps.
Preparation: Adjust the volume of this unit to 0.
After firmware update, adjust the volume to your preferred level.
Step 1. Check the current firmware version
Panasonic recommends that you update the firmware in your SC-HTB600 in case that the firmware version indicated is older than the version being offered.
(It is not necessary to update to the latest version if the current firmware version is MCU V1.49, DSP V2.34, EP V2.2, BT V2.96, TX 0.19, RX 0.20.)
- Press [SETUP] repeatedly to select "VERSION" and then press [OK].
- You can also press [
] or [
] repeatedly to select the setup item.
- You can also press [
- Press [][] to select “VERSION” and then press [OK].
- The version of the installed firmware is displayed.
- Press [OK] again to stop the display.
Step 2. Download the latest firmware on USB device
If the version of the firmware installed on your SC-HTB600 is lower than the latest version of the firmware available, please download the latest version of the firmware.
Use of firmware downloaded from this site requires agreement with the License Agreement. Please review the contents of the License Agreement beforehandPlease click the button when agreeing to the agreement.