Global Home Digital AV Support > Audio > Download > SC-ALL5CD Firmware Download

SC-ALL5CD Firmware Download

Update Information

Model Number SC-ALL5CD
Update Version

2.0.32-S/1.33/1.2.5MA3
Update Date

Nov. 27 ,2018

Improvement

Date/Version Description
Nov. 27 ,2018

2.0.32-S/1.33/1.2.5MA3
  • Improvement of operation usability.
Sep. 18 ,2018

2.0.32-S/1.32/1.2.5MA3
  • Improvement of operation usability.
Oct. 27, 2016

2.0.32-S/1.30/1.2.5MA3
  • Supports CD song information display on Panasonic Music Streaming apps (V3.4.0 and above)
  • CD playback ability improvement
Sep. 17, 2015

2.0.32-S/1.24/1.2.5MA3
  • Improvement of streaming music
Aug. 18, 2015

2.0.32-S/1.18/1.2.5MA3
  • Improvement of streaming music
  • CD playback ability improvement
June. 23, 2015

2.0.32-S/1.08/1.2.5MA3
  • Improvement of streaming music

Perform the software update

    There are 2 methods to perform the Software update.
  • Method 1 - By using Panasonic Music Streaming App.
  • Method 2 - By using Main set key operation.

Method 1 - By using Panasonic Music Streaming App

Preparation

  • Connect this system and your smartphone to the same network. Follow the procedure described in the "Wi-Fi ® QUICK SETUP GUIDE". Make sure that the network is connected to the Internet.
  • Install your smartphone with the app "Panasonic Music Streaming".
    *Always use the latest version of the app. (Android app version 3.0, iOS app version 3.0 and above)
  • Turn this system on.

Checking for available software updates

Updating the software

Method 2 - By using Main set key operation

    Perform the following steps.

  • Step 1  Check the current software version of your SC-ALL5CD.
  • Step 2  Perform the software update.

Step 1. Check the current software version

Panasonic recommends that you update the software in your SC-ALL5CD in case that the software version indicated is older than the version being offered.
(It is not necessary to update to the latest version if the current version SC-ALL5CD(2.0.32-S/1.33/1.2.5MA3) is installed.)

  1. Turn the unit on.
  2. Press [SETUP] repeatedly to select "SW VER." and then press [OK].
    The version of the installed software is displayed.
    • "2.0.30-S/1.04/1.2.5MA3" (Example)
  3. Press [OK] to exit.

Step 2. Perform the software update

<Preparation>
    Connect this unit to the wireless or the wired network and make sure that the wireless network is connected to the Internet.

<Caution>
     During the update process, do not disconnect the AC mains lead.

Software update procedure

  1. Turn the unit on.
  2. Press [RADIO/EXT-IN] repeatedly to select "NETWORK" selector.
  3. Press [SETUP] repeatedly to select "SW UPDATE" and then press [OK].
  4. Press [] [] to select "OK?   YES" and then press [OK] to start the update.
    The system's display changes as follows.
    • The update process may take longer or may not work properly depending on the connection environment.
    • During the update process, no other operations can be performed.
  5. After the update is completed, " SUCCESS" will be shown on the display.
    Disconnect the AC mains lead and reconnect it after 1 minute.

* If "SUCCESS" is not displayed, please refer to the following solutions.

Message Meaning Solution
"NO NEED" There are no updates. Not necessary to update.
"NO CONNECT" This unit cannot connect to the network. Check the network connection.
"FAIL" The software download has failed. The firmware download has failed. Please try again later.
The server cannot be found. Make sure that the wireless or the wired network is connected to the Internet.