Operations required to enjoy music with Bluetooth speakers.

1. Register the Bluetooth speaker on your smartphone (only for the first time)
→ For details, refer to the Bluetooth speaker instruction manual.

2. Select Speaker
→ For more information, please refer to the "Selecting a speaker" menu.

3. Select sound source and song
→ For more information, see the "Selecting a song" menu.

Please confirm the licenes. If you agree it, check [agree] and tap [Agree & Proceed]

Launching the application will start searching for AllPlay-compatible speakers.

If the AllPlay-compatible speakers have already been set, or the setting is unnecessary, tap either [Do not search again] or [Skip settings].

After searching for and setting AllPlay-compatible speakers, the Tutorial screen appears.
Tap [Exit Tutorial] to finish the tutorial.

If you do not wish to display the Tutorial next time, remove the check mark for [Show this tutorial next time].

1. Select the speaker to output sound.

If the "Speaker" screen is not displayed, tap the speaker icon on the upper left to display the "Speaker" screen.

Icon images differ depending on the type of speaker currently selected.

2. Tap "This device".

3. Open the control center.

- For iPads with iPhone X or later or iOS 12 or later: Swipe down from the top right corner of the screen.

- For iPhone 8 or earlier or iOS 11 or earlier: Swipe from the bottom of the screen to the top.

4. Touch and hold the audio card in the upper right corner and then tap .

5. Tap the Bluetooth speaker as a destination for streaming audio during playback.

1. Tap the [Browse] tab to show the "Browse" screen.

2-1. If you want to play back the song of your iPhone/iPad/iPod touch, tap [Music on this device] on the top of the list.

2-2. If you want to play back the song of a DLNA server or Network hard disk (NAS: Network Attached Storage), tap the server name.

2-3. If you want to play back the song of the playlist you created, tap [My Playlist].

2-4. If you want to play back the song you played recently, tap [Recently Played].

You can search for songs of your iPhone/iPad/iPod touch and NAS.
Enter the keyword on the search box.
The songs including the keyword of song name, artist name, album name and file name are displayed.

• * If you narrow down the search range, please perform the search on screen of the folder you want to narrow down.
• * It may take longer to search songs of NAS.
• * You can stop searching by using "back button" of your device.

1. When you select a music source (device), some folders such as artist and album are displayed. Select your preferred artist or album, and go to the song selection screen.

2. When you select the [My Playlist], some playlists you created previously are displayed. Tap your preferred playlist, and go to the song selection screen.

3. When you select the [Recently Played], some songs you played recently are displayed.

1. Tap the icon of the right side of the desired song.
2. Tap [Play Last] of the option menu.

1. Drag and drop the icon of the right side of the desired album (folder) name to [Queue] tab.

Tap the [Queue] tab to display the "Queue" screen.
You can confirm reserved songs on current speaker.

On the "Queue" screen, drag and drop the icon on the right side of the song to rearrange, and move the song.

On the "Queue" screen, swipe the song to delete to either left or right.

On the "Queue" screen, tap [Clear all], then tap [OK].

You can create some playlists in the "Queue" screen.
1. Tap the [Queue] tab to show the "Queue" screen.
2. Tap [Save] on the upper right of the "Queue" screen.
3. Enter playlist name, and tap [OK].
You can select the playlist you have already created from the [My Playlist] in the "Browse" screen.

• * Your playlists are avalable in only your iPhone/iPad/iPod touch.

You can edit the playlists you have created in the "Browse" screen.
1. Tap the [Browse] tab to show the "Browse" screen.
2. Tap [My Playlist], and select a playlist name you want to edit.
3. Tap [Edit] to display the "Playlist Edit" screen.
You can use the following function to edit your playlists.

•Delete the song one by one

•Rearrange the song order

•Edit playlist name

Finally, tap [Done] to save the changes you made in your playlist.

You can delete the playlists you have created in the "Browse" screen.
1.Tap [My Playlist], and select a playlist name you want to delete.
2. Tap [Delete], then tap [OK].

• * This app cannot mix multiple music sources and output from one speaker at the same time.
• * If you select the same speaker from another app, connection to the speaker will be lost. To play back using your app, select the music source or song again.
• * If you select the speaker for AllPlay from another device while the speaker is operated as DLNA speaker, playback starts as AllPlay-compatible speaker, but the playback status remains in the device which operates the DLNA speaker.
• * Depending on the music source device, playback time of the song may be wrongly displayed. For details, consult the manufacturer of your music source device.
• * For DLNA, pause operation may not work depending on the DLNA-compatible speaker or the audio format of the song.
• * If the speaker unit or the remote controller has the [F.SKIP] or [B.SKIP] key, those key operation may not work properly during playback of AllPlay or DLNA content.

In Panasonic Music Streaming, you can enjoy the music in the following simple operation.

1. Network connection settings of AllPlay speaker (first time only)
→ For more details, please refer to "Launching the application" menu.

2. Selection of speakers
→ For more details, please refer to "Selecting a speaker" menu.

3. Selection of music sources and songs
→ For more details, please refer to "Selecting a song" menu.

4. Songs play back from the selected speaker

Launching the application will start searching for AllPlay-compatible speakers.

If the AllPlay-compatible speakers have already been set, or the setting is unnecessary, tap either [Do not search again] or [Skip settings].

Tap [Add] if no AllPlay-compatible speakers are found.
When the "Speaker selection" screen is displayed, select AllPlay-compatible speakers on the same network. Then, set the speakers according to the on-screen instructions.

• * Tap [Skip settings] if the setting is unnecessary.
• * If your speakers are not displayed in "Speaker selection" screen, please tap [Add music services] to confirm the country setting.

After searching for and setting AllPlay-compatible speakers, the Tutorial screen appears.
Tap [Exit Tutorial] to finish the Tutorial.

If you do not wish to display the Tutorial next time, remove the check mark for [Show this tutorial next time].

Select the speaker to output sound.

If the "Speaker" screen is not displayed, tap the speaker icon on the upper left to display the "Speaker" screen.

Icon images differ depending on the type of speaker currently selected.

Tap the name of speaker to output sound. When the speaker is selected, the "Speaker" screen will be closed.
Confirm that the speaker name on the upper left has changed to the name of the selected speaker.

Swipe iPad/iPhone/iPod touch screen from bottom to upward to display the control center.
Tap [AirPlay], and select the speaker on the screen to set.

Tap [Settings] on your iPad/iPhone/iPod touch to display the "Settings" screen.
Tap [Bluetooth] to display the "Bluetooth" screen, then set to On if necessary.
Select the speaker on the devices list to set.

Bluetooth® speakers after pairing as above can be changed from the control center as well as AirPlay speakers.

On the "Speaker" screen, tap > [Add AllPlay speaker] to display the "Speaker selection" screen. Select AllPlay-compatible speakers to add, and make the setting according to the on-screen instructions.

• * For DLNA or Bluetooth® speaker, only one device can be selected.
• * If your speakers are not displayed in "Speaker selection" screen, please tap [Add music services] to confirm the country setting.

Tap on the "Speaker" screen, and tap the name of the speaker to confirm the information.
You can confirm "Device Name", "Firmware Version", "IP address", "MAC address", "Wi-Fi signal strength" and "Wireless or Wired Network".

Tap on the "Speaker" screen, and tap the speaker name to change.
When the setting screen of each speaker is displayed, tap [Device Name].

When the "Device Name" window appears, change the speaker name, and tap [OK].
Confirm the speaker name has been changed.

• * It may take longer to display AllPlay-compatible speaker(s) than to display Bluetooth speaker(s). A maximum of two minutes will be required to display.
• * Depending on the contents, playback on the selected speaker may not be possible. (e.g. unsupported format, copyright-protected content etc.)
• * For more information about setting, please refer to the manual of each product.

1. Tap the [Browse] tab to show the "Browse" screen.

2-1. If you want to play back the song of your iPad/iPhone/iPod touch, tap [Music on this device] on the top of the list.

2-2. If you want to play back the song of a DLNA server or Network hard disk (NAS: Network Attached Storage), tap the server name.

2-3. If you want to play back the song of the playlist you created, tap [My Playlist].

• * If you playback the song in iPod/iPhone/iPod touch, it may take a few seconds(2-3 sec.).

You can search for songs of your iPad/iPhone/iPod touch and NAS.
Enter the keyword on the search box.
The songs including the keyword of song name, artist name, album name and file name are displayed.

• * If you narrow down the search range, please perform the search on screen of the folder you want to narrow down.
• * It may take longer to search songs of NAS.

1. When you select a music source (device), some folders such as artist and album are displayed. Select your preferred artist or album, and go to the song selection screen.

2. When you select the [My Playlist], some playlists you created previously are displayed. Tap your preferred playlist, and go to the song selection screen.

1. Tap the icon of the right side of the desired song.

2. Tap [Play Last] of the option menu.

1. Drag and drop the icon of the right side of the desired album (folder) name to [Queue] tab.

Tap the [Queue] tab to display the "Queue" screen.
You can confirm reserved songs on current speaker.

On the "Queue" screen, drag and drop the icon on the right side of the song to rearrange, and move the song.

On the "Queue" screen, swipe the song to delete to left.

On the "Queue" screen, tap [Clear all].

You can create some playlists in the "Queue" screen.
1. Tap the [Queue] tab to show the "Queue" screen.
2. Tap [Save] on the upper right of the "Queue" screen.
3. Enter playlist name, and tap [OK].
You can select the playlist you have already created from the [My Playlist] in the "Browse" screen.

• * Your playlists are avalable in only your iPad/iPhone/iPod touch.

You can edit the playlists you have created in the "Browse" screen.
1. Tap the [Browse] tab to show the "Browse" screen.
2. Tap [My Playlist], and select a playlist name you want to edit.
3. Tap [Edit] to display the "Playlist Edit" screen.
You can use the following function to edit your playlists.

•Delete the song one by one

•Rearrange the song order

•Edit playlist name

Finally, tap [Done] to save the changes you made in your playlist.

You can delete the playlists you have created in the "Browse" screen.
1. Tap [My Playlist], and select a playlist name you want to delete.
2. Tap [Delete], then tap [OK].

• * This app cannot mix multiple music sources and output from one speaker at the same time.
• * If you select the same speaker from another app, connection to the speaker will be lost. To play back using your app, select the music source or song again.
• * If you select the speaker for AllPlay from another device while the speaker is operated as DLNA speaker, playback starts as AllPlay-compatible speaker, but the playback status remains in the device which operates the DLNA speaker.
• * Depending on the music source device, playback time of the song may be wrongly displayed. For details, consult the manufacturer of your music source device.
• * For DLNA, pause operation may not work depending on the DLNA-compatible speaker or the audio format of the song.
• * If the speaker unit or the remote controller has the [F.SKIP] or [B.SKIP] key, those key operation may not work properly during playback of AllPlay or DLNA content.

A song can be played back from multiple AllPlay-compatible speakers at the same time.

To register different songs to multiple AllPlay-compatible speakers respectively, select each speaker, and then select the music source (device) with the same procedure as in the "Selecting a song" menu.

Grouping multiple AllPlay-compatible speakers can do multiple tasks at the same time, such as registering the songs to play back and playing back the songs.

On the "Speaker" screen, drag and drop the icon of the speaker to play back to the icon of another speaker.
Then, multiple speakers are grouped, and the icon changes to the grouped icon.

Tapping the name of the grouped speaker will select those speakers, and the "Speaker" screen will be closed.
Confirm the Speaker icon on the upper left has changed to the grouped speaker icon.

Further, multiple AllPlay-compatible speakers can be grouped by drag and drop the speaker icon.

• After grouping, the status of the speaker does not change until a source is selected and start playback. Once start playback, the sound comes out from grouped speakers.

The speaker already grouped can be moved to another group.

On the "Speaker" screen, drag and drop the speaker icon to move to another group.

The settings (registration of music sources, songs, etc.) can be moved to another speaker or speaker group as they are.

On the "Speaker" screen, drag and drop the music source icon to move to another speaker or speaker group.

Drag and drop the music source icon to [This Device].
Tap [AirPlay] on the control center, and select AirPlay speaker or Bluetooth® speaker on the screen.

For Bluetooth® speaker, do pairing in advance.
For details, please see "To select Bluetooth®-compatible speakers" in "Selecting a speaker".

The volume of grouped speakers can be changed collectively or individually.

Slide the volume control slider on the screen during playback to change the volume of grouped speakers collectively.
Also, operate the individual setting screen to control the volume of grouped speakers individually.

Drag the speaker icon you want to ungroup, and drop to the outside of group.

To enjoy ALL70T or ALL30T in surround mode, you need a pair of ALL2 or ALL6 speakers.

Tap on the "Speaker" screen to display the "Speaker settings" screen and select the ALL70T or ALL30T speaker.

Tap [Surround Setting], make the setting according to the on-screen instructions.

Using this app, you can enjoy streaming music of various music source (Radio/CD/Bluetooth® device/External audio input/USB device/Digital audio input) from another AllPlay-compatible speakers.

Select the Re-streaming sources on the "Browse" screen, and then select the speaker.
(In this example, "CD" and "Kitchen" are selected as music source and speaker respectively.)

The "Living" speaker and the "kitchen" speaker will be grouped.
When selecting the song, the song on the CD is played back through both the "Living" and "kitchen" speakers.

• * Playback screen is different depending on selected Re-streaming sources.
• * If Bluetooth set as Re-streaming sources, playback the song or operate from Bluetooth® source device.
• * If a speaker which is streaming music from other device, is grouped with another speaker and then ungrouped, it will stop playback. Please select a source again to start playback.
• * You can start and stop the Re-streaming of any selectors except for the "Preset" selector.
  - Tap the [Start Re-Streaming] or [Stop Re-Streaming] on the "NowPlaying" screen.
  - If you tap the [Stop Re-Streaming], playback from the speakers other than the music source is stopped.
  - If you tap the [Start Re-Streaming], playback from the speakers other than the music source is also started.
• * In case of the Re-streaming of "Preset" selector, you can start and stop playback of preset by tapping playback button / pause button.

You can enjoy other music app from AllPlay-compatible speakers through Bluetooth®.

1. Select AllPlay-compatible speaker.

2. Tap [use Other Music App through Bluetooth] in the "Browse" screen.
→ Connection through Bluetooth®

3. Select music app on the Home screen.

This function automatically tries to re-connect with Bluetooth® to other speakers when Bluetooth® disconnects (e.g., you move to another room).
It is only applicable during Bluetooth re-streaming.

Change the switch of [Auto Bluetooth Re-connection] in the "Settings" screen to "On" to activate this function.

• * Please make Bluetooth® pairing with your iPad, iPhone, iPod touch device and all speakers in the group in advance.
• * Please make Bluetooth® connection with each speaker in the group only from your iPad, iPhone, iPod touch device.

Adjust the sound quality according to your preference.

Tap on the "Speaker" screen to display the "Speaker settings" screen.
Select the speaker to adjust (In this example, the ALL2 speaker is selected).

Use the preset EQ for more advanced settings of sound quality.

Select the HC1020 speaker on the "Speaker settings" screen, and tap [Equalizer] to open the "Preset EQ" screen.
Select your favorite preset EQ from [Heavy], [Soft], [Clear], [Vocal], [Flat], [Manual].
When [Manual] is selected, adjust Bass and Treble.

Use the D.Bass for more dynamic deep bass sound quality.

Select the HC1020 speaker on the "Speaker settings" screen, and change the switch of [D. Bass] to "On" to activate this function.

Use the surround for richer surround effect.

Select the HC1020 speaker on the "Speaker settings" screen, and change the switch of [Surround] to "On" to activate this function.

Use the equalizer for more advanced settings of sound quality.

Tap [Equalizer] to open the "Equalizer" screen.
Adjust the Bass, Treble and volume level, then change the switch to "On" to activate the equalizer.
After the adjustment has finished, tap [<] on the upper left to return the previous screen.

Make the channel setting.

Tap [L/R Channel Setting], then select your preferred channel.

• In case of ALL6, "Mono" can be selected.

This function delivers a wider sound field with outstanding clarity and optimal room-filling sound.

Select the HC1020 speaker on the "Speaker settings" screen, and tap [Wall Mount] to open the "Wall Mount" screen, then select your preferred mode.

This function makes human voice easily heard.

Select the ALL05 speaker on the "Speaker settings" screen, and change the switch of [Voice mode] to "On" to activate this function.

You can set the alarm and sleep timer functions. Available settings: Alarm 1-5 On/Off, time, day, alarm sound, snooze duration and sleep timer.

Tap on the "Speaker" screen to display the "Speaker settings" screen.
Select the ALL2 speaker, and tap [Alarm/Sleep setting].

Select the alarm to set on the "Alarm" screen, set the time, day and alarm sound, and then tap [Set].

On the "Alarm/Sleep timer setting" screen, change the switch "On" to activate the timer setting.

To enable the snooze setting, tap [Snooze Duration] and select the duration.

To enable the sleep setting, tap [Sleep] and select the sleep timer time.

This function makes human voice easily heard.

Select the ALL2 speaker on the "Speaker settings" screen, and change the switch of [Clear Mode Dialog] to "On" to activate this function.

You can add AllPlay-compatible Music Services.

On the "Browse" screen, tap [Add music services] to display the "Music Service" screen.
Tick the checkbox of the service to add, and return to the previous screen by tapping [Done] on the upper left.

The music service icon appears on the music source list on the "Browse" screen.

Tapping each icon of the added services will launch each service. Make the setting according to the on-screen instructions.

• If the application of each service is not installed, the installation screen (App Store) will be displayed.

If a new version of firmware for AllPlay-compatible speakers is found when you select a speaker on the "Speaker" screen, the following pop-up screen appears.

Tap [Update] > [Start] to start update, and follow the on-screen instructions to complete updating the firmware.

* Do not disconnect the AC power supply cord of speaker(AC mains lead) while update.

* After update, disconnect the AC power supply cord of speaker(AC mains lead) and reconnect it to use the AllPlay-compatible speaker.

* Updating requires approximately ** minutes as follows.
[SC-ALL8 / SC-ALL3 / SH-ALL1C] : 4 minutes
[SC-PMX100 / SC-ALL5CD] : 15 minutes
[SC-ALL2] : 15 minutes
[SC-ALL70T / SC-ALL30T] : 15 minutes
[SC-ALL9 / SC-ALL6] : 8 minutes
[SC-ALL7CD] : 10 minutes
[SC-ALL05] : 10 minutes
[SC-HC1040 / SC-HC1020 / SC-HC1000] : 10 minutes
[SC-PMX152 / SC-PMX150] : 10 minutes

For SC-ALL05