Network Download |
<About Network Download> Software of the unit (HDD Recorder) can be updated automatically via Internet by following method |
| <UPDATE procedure> | |
1 |
If the” Software update in Standby”in the Setup menu is set to “ON”,updating will be performed automatically. |
2 |
Update of the software is done when the unit is in standby mode, it is recommended to leave the unit standby, when the unit is not used. |
3 |
It may take approximately 1 hour. This time depends on transfer rate. |
 |
|
4 |
During download, "SW-DL" is displayed on the unit's display. When the update completes, the unit returns to standby where the time is displayed. The unit now becomes operative |
<Caution> |
|
During the firmware update procedure do not disconnect from AC power until the update completes. If turn the unit on, the update will be cancelled. |
|
 |
|
