Head on this page.
Check the file size of the downloaded file and decompress it. (Supported for Windows only.)
Please make sure that you have selected the correct region before you proceed to the download process.
You will not be able to install firmware designated for a region that is different to the region in which you purchased your Panasonic Blu-ray Disc™ Player.
To create a firmware update disc, write the decompressed file to a CD-R disc using CD-R writing software. Follow the operating instructions for the writing software to create the disc. Once the firmware update disc is created, continue to the next step.
1. About the CD-R disc:
If the firmware update disc has writting errors, it will not be readable by the Panasonic Blu-ray Disc™ Recorder and you will not be able to update the firmware.
Always use a blank CD-R disc. Do not use a CD-RW disc.
2. About the CD-R writing software:
If you are creating the firmware update disc on a Microsoft Windows PC, we recommend using the standard Windows XP writing application.
The firmware update disc requires to be created with ISO9660 format. In case you are creating the disc on a Windows Vista PC, Windows Vista standard writing application does NOT support ISO9660 format. Please create with a supporting writing software.
When using writing software, please follow the operating instructions provided for the writing software. Please be aware that "packet-writing" is not supported.
It will take about 15 minutes to update the firmware. During the firmware update procedure, do not turn the Panasonic Blu-ray Disc™ Player off nor disconnect AC power. Do not press any buttons,except as instructed.
Failure to do so may result in the Panasonic Blu-ray Disc™ Player becoming unresponsive which will require repair.
During the firmware update procedure, do not close the front cover.
If the front cover is closed during the update, the disc tray will be damaged by hitting the cover at the time of firmware update completion.
Turn your Panasonic Blu-ray Disc™ Player on.
Press [OPEN/CLOSE] on the Panasonic Blu-ray Disc™ Player to open the disc tray. Load the firmware update disc and press [OPEN/CLOSE] on the Panasonic Blu-ray Disc™ Player to close the disc tray.
DO NOT press any other buttons and DO NOT close the front cover during the firmware update.
The Panasonic Blu-ray Disc™ Player will first display "Bye" on the front panel display, automatically turn itself off and then, within a few seconds, restart again and automatically start installing the firmware from the firmware update disc.
If the Panasonic Blu-ray Disc™ Player does not restart automatically after it has turned off, please press [POWER] on the Panasonic Blu-ray Disc™ Player - the Panasonic Blu-ray Disc™ Player will then restart and install the firmware update as normal.
The time to complete the firmware update will vary, however the time should not exceed 15 minutes. Please be patient during the firmware upgrade!
During the update process, various messages will show on the front panel display of the Panasonic Blu-ray Disc™ Player.
When the firmware update is completed, "FINISH" is displayed on the front panel display of the Panasonic Blu-ray Disc™ Player and the disc tray opens automatically.
Please take out the firmware update disc and turn off power with the power button on the Panasonic Blu-ray Disc™ Player.
If the firmware version currently installed in the Panasonic Blu-ray Disc™ Player is the same or more recent than the firmware version on the update disc, "UNSUP/PORT" will be displayed for approximately 5 seconds on the front display of the Panasonic Blu-ray Disc™ Player. In this case, an update is unnecessary -please remove the disc.
Display on the Panasonic Blu-ray Disc™ Player:
If you have any problems after installing the new firmware, please contact the Global Service Center Network.